User manual

Ilmatar Arena

Updated: 08.10.2026

Before the match starts

This instruction applies to all three halls at Ilmatar Arena: H1, H2 and H3. Common match, media and USB instructions as well as troubleshooting are below. Switching the image source for Hall 1 is described separately.

Go through these points well in advance of the match. The most important thing is to ensure that the scoreboard, control tablet, media, and sound are working before the game starts.

Prepare the system

  • Ensure the control tablet is charged and running.
  • Check that the connection indicator is green.
  • Choose the correct species from the species selection.
  • Create a match or open the required match view.
  • Transfer team names, logos and other media from the USB stick.

Test before playing

  • Check that the team names and logos are displayed correctly on the scoreboard.
  • Test the game clock, points, and other sport-specific buttons.
  • Test advertisements, videos and other display media.
  • Ensure that the buzzer, sounds and announcements can be heard through the venue's sound system.
  • If you are using an HDMI source, check that the image is displayed and then return the source back to the input board after testing.

The sounds are important to test beforehand
Sound issues are often only noticed when the match starts. Test the buzzer, videos, and any announcements beforehand.

Sports-specific instructions

Open the instructions for the sport being used. The instructions cover match creation, the match clock, scoring, and sport-specific functions.

Media preparation

Resolution of the main displays

HallResolution of the main screen (width × height)
H12368 × 896 px
H2832 × 384 px
H3832 × 384 px

The images above show the pixel resolutions of the main displays. The recommended file size for media files is presented separately below.

Prepare the images and videos according to the file size recommendations below. The aspect ratio of the full-screen footage and the match advertising area may vary.

ContentsShape
PicturesJPG, JPEG, PNG
VideoMP4
SoundsMP3, WAV
Team nameTXT
UsageSize or recommendation
Photos and videos1920 × 1080 px
LogoAt least 400 × 400 px

The recommended maximum video bitrate is 5000 kbps. The transparent logo is saved in PNG format. Ensure the visibility of images, videos and logos before the event.

USB drive folder structure

Create a folder at the root of the USB stick dsbController. Save the material under it in the following folders.

IMPORTANT: Only USB flash drives formatted with the NTFS file system are supported.

If you are using the two-match view
Save home– and guest-folders with the names of the teams of the first ice hockey match nimi.txt-files and the names of the second match nimi2.txt-files. Type the team name in the first line of each file. In this view, the teams' logos are not displayed.

FolderContents
adAdvertising images and videos to be shown during the match.
goalScoring data.
guestLogo and name of the visiting team. In the situation of two ice hockey matches, the name of the second match is recorded in the file nimi2.txt.
homeLogo and name of the home team. In the situation of two ice hockey matches, the name of the second match is recorded in the file nimi2.txt.
mediaManually displayed images, videos and sounds.
FileLocation and use
home.png, home.jpg or home.jpegHome team logo home-folder.
guest.png, guest.jpg or guest.jpegAway team logo guest-folder.
nimi.txtWithin the team's own home- or guestin the folder. The first line is the team name.
nimi2.txtIn the state of two ice hockey games, the team name of the second game. Save the file as well homeThat guest-folder. The first line is the team name.
horn.mp3My buzzer media-folder.

Hallmarked instruction: H1 image source

In Hall 1, the image source can be changed in the control box below the control panel via the hole. This instruction for changing the image source applies only to Hall 1.

Problem situations

These troubleshooting instructions apply to all three systems. Start with the symptom and go through the steps in order.

  1. If the USB drive doesn't work, check the file structure, file names, file formats, and sizes.
  2. Turn off the controller for 30 seconds and turn it on again.
  3. If the problem persists, contact the EJUT contact person.

If you encounter problems with the materials you've created when transferring them to a USB stick, completely clear the stick and recreate the folder structure.

Connection to the scoreboard is not working
  1. Check the connectivity indicator in the top-right corner of the control tablet.
  2. If the indicator light is red, restart the control tablet.
  3. Check that the control tablet is online.
The system is not responding, even though the connection indicator is green.
  1. Open the top-left menu.
  2. Select Start the system.
  3. Please wait approximately 2 minutes and test the system again.
The sound is not working
  1. Check the audio cable connections to the venue's sound system.
  2. Check the system's audio settings.
  3. Test the sound with another media file.

Contact support

If the problem still persists after following the instructions, please send a support request with the venue and hall number (H1, H2 or H3), the sport, date, time, a description of the problem, and information about what troubleshooting has already been tried.

support@jidoka.fi